Description
SMART CELL BILGE ALARM IMO Resolution MEPC 107 (49) came into effect on 1st January 2005 and applies to all new installations of oil content monitors within engine room spaces. This applies to existing ships and ships whose keel is laid on of after 1st January 2005. The Rivertrace Smart-Cell Bilge Alarm meets the requirements of MEPC 107 (49) for monitoring of 3 oil types: Fuel Oil, Diesel and Emulsions. By utilizing the Smart- Cell Detector Array Technology, technology developed by Rivertrace, the Bilge Alarm analyses all three oil types simultaneously without the need for re-calibration. A manual cell clean device is included as standard to easily enable routine maintenance. Optical cell fouling is recognized as a leading cause of monitor malfunction or incorrect reading. By simple operation of the manual clean device, the Smart-Cell remains in optimum operating condition.
Specifications
| Measurement | |
| Oil types: | Fuel Oil, Diesel and Mixture C (IMO defined) |
| Clean water calibration: | +/- 2ppm of factory set values |
| Oil measurement range: | 0 – 40 ppm all types |
| Resolution: | 1 ppm |
| Accuracy oil + solids: | within +/- 5ppm as per IMO requirements |
| Solids discrimination: | 100ppm Iron Oxide |
| Alarms | |
| Oil alarm 1 & 2 setpoint: | 1 – 15 ppm user adjustable |
| Oil alarm 1 delay: | 0 – 5 seconds user adjustable |
| Oil alarm 2 delay: | 0 – 600 seconds user adjustable |
| Alarm contacts: | 2 single pole Alarm Relays 5A @ 230Vac (NC in alarm) |
| User Interface | |
| LCD display: | 4 line x 16 alphanumeric back lit LCD display |
| Control + Setup: | 3 button keypad |
| Input / Output | |
| Analogue output: | 24v loop powered 4-20mA / 0 – 20mA |
| Communications: | RS232 protocol |
| Power and Relay Cable terminals: | up to 2.5mm2 |
| Analogue Out | |
| Cable terminals: | up to 1.5mm2 |
| Switch inputs: | 2 x switch inputs for separator & flow status up to 1.5mm2 |
| Data Storage and Retrieval | |
| Calibration data: | Stored onboard microcontroller |
| Storage data: | Stored on board mounted memory media |
| Data retrieval: | via LCD display or download to PC with Hyperterminal |
| Environmental & Sample | |
| Ambient temperature: | -10 to +60oC |
| Sample / clean water temperature: | +1 to +60oC |
| Sample / clean water flow rate: | 0.5 – 4.0 litres / min |
| Sample / clean water pressure: | 0.1 bar – 10 bar |
| Sample / clean water select: | 3 way universal solonoid valve |
| Sample pipe fittings: | 1/4 inch BSPP |
| System and Supply | |
| Supply voltage: | 115 / 230V ac, 50 – 60Hz (24V ac available) |
| Supply voltage Consumption: | < 50 VA including solenoid valve |
| Protection class: | IP 65 |
| Approvals: | IMO MEPC 107 (49) and Class approval from NKK, GL + USCG. |
| Overall Dimensions – mm: | 289 (w) X 205 (h) X 149 (d) |
| Weight: | 3.3kg |
Reviews
There are no reviews yet.